Oven & Induction Cooktop Installation
Landmark Electrical installs wall ovens, freestanding cookers and electric and induction cooktops across Sydney and Melbourne. We check that your circuit and switchboard can carry the new appliance, run a new circuit where it cannot, and connect everything to the manufacturer’s instructions. Call 0405 091 456 for a free quote.
Switching from gas to induction is one of the more common kitchen jobs we do. Induction cooktops draw more power than most older cooking circuits were built for, so it pays to have the circuit checked before the new cooktop arrives.
- Licensed & insuredNSW 377159C · VIC REC-34776
- Written price firstNo surprise extras
- Lifetime labour guaranteeOn our workmanship
- Family ownedSydney & Melbourne
What we install
Induction and electric cooktops
Most full-size induction cooktops need a dedicated circuit, commonly 32 amps. We confirm the rating from the installation manual and your switchboard before quoting.
Wall ovens
Some wall ovens plug into a standard power point and others are hardwired on their own circuit. We fit either, and replace like for like where the cavity matches.
Freestanding cookers
Freestanding ovens with a cooktop usually need a hardwired connection on a heavy-duty circuit, which we install or upgrade as needed.
New cooking circuits
Where your existing circuit is too small, we run a new cable from the switchboard with its own circuit breaker and safety switch protection.
Moving from gas to electric
Circuit and switchboard check
We check the spare capacity in your switchboard and your supply. Some older boards need an upgrade before they can take an induction cooktop.
Capping the gas
The old gas cooktop must be disconnected and the gas line capped by a licensed gasfitter. We work alongside your gasfitter so the changeover happens in one go.
Compliance paperwork
New circuit work comes with a compliance certificate: a CCEW in NSW or a Certificate of Electrical Safety in Victoria.
Common questions
Do I need a new circuit for an induction cooktop?
Often, yes. Many older homes have a 20 or 25 amp cooking circuit, and larger induction cooktops need more. We will tell you before we quote.
Can you install an oven I bought myself?
Yes. Have the installation manual handy and we will confirm the circuit it needs.
Will my switchboard need upgrading?
Sometimes. Older boards with ceramic fuses or no spare room usually do. We check it first so you know the full cost upfront.
Why choose Landmark Electrical for oven and cooktop installation
We check the circuit before the appliance arrives, so installation day is straightforward.
- Circuit checked against the installation manual
- New cooking circuits with safety switch protection
- Compliance certificate for new circuit work
Call 0405 091 456 or send your details below for a free quote.
How it works
- 1Call or send your detailsTell us what you need. We pick up 24/7 for emergencies.
- 2Get a written priceA licensed electrician confirms the price before any chargeable work starts.
- 3Job done properlyOn time, tested, tidied up, and backed by our lifetime labour guarantee.
What our customers say
Landmark came quickly to quote and once I accepted the quote the work was scheduled. The team rang before they arrived and got on and did the work. They also cleaned up after themselves which was lovely to see. Highly recommend these guys.
Great company to deal with. Very efficient in the work they provided. Would not hesitate to use this company again if l ever need electrical work done again in the future. Highly recommend Landmark Trades - Electrical
Landmark technicians who worked on our office lighting were easy to communicate with and coordinated seamlessly with our office schedule. They collected the light fitting I chose and the installation was done in no time. Fast, friendly and professional! Highly recommended!
Prompt, efficient and excellent service by all the guys involved in our jobs. We had 5 different things we asked for including install of 2 new XL Tastics, updated power box board and replace multiple halogen downloghts with new LED ones and the work was completed in under 4 hours.
Adam the electrican was wonderful, very percise and efficient, did a great job and a lovely guy as well . I would highly reccomend this lovely company .
Got a new power mains board, new safe electrical power points put in shed for my pool equipment , 2 new light switches, the guys were really professional, polite and efficiant. Super happy with Landmark fantastic job. Will defiantly use them again. Thanks guys.😁
Free, no-obligation quote
Book a licensed electrician
Send your name, number and postcode and we'll call you back to talk it through. Or call now on 0405 091 456.
- $0 call-out 7am–3pm, Mon–Fri – emergencies included
- Written price before we start
- 15% seniors discount available
Today’s Specials
